Ortofon Brazo Ortofon TA-210

The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. Our extensive knowledge of vibration properties and characteristics in different shapes and materials has been applied for optimization of TA-210 tonearm.  • TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings  • TA-210 has a standard 5-pin DIN connector for tonearm cable  • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)  • Counterweight with Inner/outer scale    - Inner scale to be applied with main counterweight    - Outer scale to be applied when extra mass ring is added  • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g  • TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template  • Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)  • Extra mass ring weight 45g   "...The deck and combination has an attractive quality of making the midrange of the orchestra colours seem more intense and concentrated, as if you were listening in Technicolor!... ...The TA-210 has an unusually clean vibrational spectrum... ...So although the TA-210 is a long and conventional looking arm under measurement it performs very well..."   The extra mass ring   may need to be attached to achieve proper tracking force. The counterweight should be attached onto the rear of the tonearm with the inner number scale facing forward.  If the extra mass ring is needed, it must be installed prior to attaching the counterweight to the tonearm.  The extra mass ring should be installed on the back of the counterweight and may need to be twisted slightly to facilitate the installation. Ensure that the extra mass ring fits tightly to the thick part of the counterweight